Home > Products > Rotary Kiln > Particle Steel Rotary Kiln

Particle Steel Rotary Kiln

    Payment Type: L/C,T/T
    Min. Order: 1 Set/Sets

Basic Info

Model No.: Φ2.5×40-Φ6.0×95

Additional Info

Packaging: as your options

Productivity: 180-10000 t/d

Brand: Hongke

Transportation: Ocean,Land

Place of Origin: Henan, China

Certificate: ISO9001:2008

Port: Qingdao,Shanghai,As You Like

Product Description

The steel slag particle steel is a kind of particle steel which is sorted out in the waste furnace material of the steel plant. The particles are small , the iron content is more than 85 percent , but the steel plant is not easy to smelt in the process of tempering , because the particle steel is a comparatively loose particle, the resource is wasted and the cost is increased. The hot presssing molding system of particle steel Rotary Kiln solves the above disadvantages. Scrap metal slag is used as raw material to make iron, discus and steel cake which can be recycled.

Particle Steel Rotary Kiln 2

Working principle of Particle Steel Rotary Kiln

The raw ore is fed directly into the kiln tail of rotary kiln by electronic belt metering scale, belt conveyer, stabilizer, lock valve from storage, and only stable material bin is set at the back of kiln to reduce investment. The ore is first heated into the rotary kiln, and the ore moves backwards in the kiln and the hot air flow. After the ore is heated to the reduction temperature in the heating area, the ore enters the reduction zone, and the central temperature of the flame in the reduction zone is controlled at about 1000 ℃. The temperature of the thermal atmosphere in the reduction zone is controlled at 700 ℃ , and the magnetite is reduced to magnetite by reaction with the reduced gas. After entering the cooling zone, meeting with the incoming gas, the gas is preheated, the ore is cooled out of the kiln, after the continuous bucket conveyor water cooling, the ore goes into the storage to be selected. The particle steel rotary kiln mainly adopts block and powder mixing to reduce the operating cost .

Performance Characteristics of Particle Steel Rotary Kiln

1. Low water level reduction rate of particle iron and steel. The reduction of hot metal rate can be controlled below 2% after forming particle steel.

2. Low mass wear rate of particle steel. The closure of the system is good, therefore, there is almost no loss of the system particle steel.

3. The low power consumption system adopts advanced design method, and the total power of the system is about 20% lower than that of the conventional system.

4. Low power consumption in system operation.The material thickness is reduced, so compared with the conventional design, the cost of this bear is about 30% lower.

5. Low system accident rate. Through the simulation calculation, the system inlet adopts the lower design temperature, and adopts the special measure according to the raw material condition to adjust, therefore, the furnace lining working temperature level will not exceed the impurity melting temperature. There will be no adhesive ring accident, and non-adhesive ring damage phenomenon, the system operation rate is increased significantly.


Specification

Kiln Size

Motor Power
(kw)

Total Weight
(t)


Remark


Diameter(m)

Length(m)

Slope(%)

Yield(t/d)

Speed(r/min)

Φ2.5×40

2.5

40

3.5

180

0.44-2.44

55

149.61

Φ2.5×50

2.5

50

3

200

0.62-1.86

55

187.37

Φ2.5×54

2.5

54

3.5

280

0.48-1.45

55

196.29

External decomposition kiln

Φ2.7×42

2.7

42

3.5

320

0.10-1.52

55

198.5

----

Φ2.8×44

2.8

44

3.5

450

0.437-2.18

55

201.58

External decomposition kiln

Φ3.0×45

3.0

45

3.5

500

0.5-2.47

75

201.94

----

Φ3.0×48

3

48

3.5

700

0.6-3.48

100

237

External decomposition kiln

Φ3.0×60

3.0

60

4

800

0.3-2

100

310

----

Φ3.2×50

3.5

50

4

1000

0.6-3

125

278

External decomposition kiln

Φ3.3×52

3.3

52

3.5

1300

0.266-2.66

125

283

Preheating calciner

Φ3.5×54

3.5

54

3.5

1500

0.55-3.4

220

363

Preheating calciner

Φ3.6×70

3.6

70

3.5

1800

0.25-1.25

125

419

Waste heat generator kiln

Φ4.0×56

4.0

56

4

2300

0.41-4.07

315

456

Preheating calciner


Φ4.0×60

4

60

3.5

2500

0.396-3.96

315

510

Preheating calciner


Φ4.2×60

4.2

60

4

2750

0.41-4.07

375

633

Preheating calciner


Φ4.3×60

4.3

60

3.5

3200

0.396-3.96

375

583

Preheating calciner


Φ4.5×66

4.5

66

3.5

4000

0.41-4.1

560

710.4

Preheating calciner


Φ4.7×74

4.7

74

4

4500

0.35-4

630

849

Preheating calciner


Φ4.8×74

4.8

74

4

5000

0.396-3.96

630

899

Preheating calciner


Φ5.0×74

5

74

4

6000

0.35-4

710

944

Preheating calciner


Φ5.6×87

5.6

87

4

8000

Max4.23

800

1265

Preheating calciner


Φ6.0×95

6

95

4

10000

Max5

950×2

1659

Preheating calciner


Looking for ideal Rotary Kiln for Particle Steel Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Particle Steel Kiln Process are quality guaranteed. We are China Origin Factory of Particle Steel Kiln Pice. If you have any question, please feel free to contact us.

Product Categories : Rotary Kiln

Product Images

  • Particle Steel Rotary Kiln
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Catherine Ms. Catherine
What can I do for you?
Chat Now Contact Supplier