Home > Products > Rotary Kiln > Dolomite Rotary Kiln Price

Dolomite Rotary Kiln Price

    Payment Type: L/C,T/T
    Min. Order: 1 Set/Sets

Basic Info

Model No.: Φ2.5×40-Φ6.0×95

Additional Info

Packaging: as your options

Productivity: 180-10000 t/d

Brand: Hongke

Transportation: Ocean,Land

Place of Origin: Henan, China

Certificate: ISO9001

Port: Shanghai,Qingdao,As You Like

Product Description

Dolomite Rotary Kiln cylinder is a heated rotary part, made of high quality steel sheet coil welding, with a certain slope with horizontal. The whole kiln body is supported by the supporting wheel device and has a mechanical or hydraulic gear device to control the axial movement of the kiln body. The drive rotates the cylinder at the required speed through a ring in the middle of the cylinder. In addition to the main drive of the matching direct-current DC or frequency conversion main motor, the driving part is also provided with an auxiliary transmission device to ensure that the kiln body can still rotate slowly and prevent the deformation of the kiln body when the installation and maintenance and the main drive power supply are interrupted. In order to prevent cold air from entering and flue gas dust flowing into the cylinder, the inlet (rear) and outlet of the barrel are carried out. Material end (head) is provided with reliable kiln tail and kiln head compound fish scale sealing device.

Dolomite Rotary KilnPicture of Dolomite Rotary Dryer

Working Principle of Dolomite Rotary Kiln

Rotary kilns consist of gas flow, fuel combustion, heat transfer and material movement. Rotary kiln is how the fuel can be fully burned, the heat of fuel combustion can be transferred to the material effectively, and a series of physical and chemical changes take place after the material receives heat, and finally the finished clinker is formed.

Characteristics of Dolomite Rotary Kiln

1. The kiln fan is equipped with low power blower to achieve "low wind pressure, small air volume, low energy consumption and high effect".

2. The annular flue gas passage at the top of the kiln can make the air distribution in the kiln uniform and beneficial to the calcination effect.

3. Kiln shell steel structure, refractory brick, refractory, insulation compound masonry strength high insulation effect good kiln weight.

4. The dust removal and purification equipment is equipped to ensure the emission of smoke and dust and achieve environmental protection.

5. The distribution of heated contact surface and different granularity materials are changed continuously when the stone with different diameter is falling, which can save energy and improve the effect of calcinations to reduce overheating.

6. The two-stage ash unloading system is used to realize incessant air ash unloading, thus ensuring the stability of kiln temperature without fluctuation, and by interlocking with kiln temperature, the kiln temperature can be adjusted to make the kiln smooth and high yield.

Technical Parameters of Dolomite Rotary Kiln

specification

Kiln Size

Motor Power
(kw)

Total Weight
(t)

Remark

Diameter(m)

Length(m)

Slope(%)

Yield(t/d)

Speed(r/min)

Φ2.5×40

2.5

40

3.5

180

0.44-2.44

55

149.61

Φ2.5×50

2.5

50

3

200

0.62-1.86

55

187.37

Φ2.5×54

2.5

54

3.5

280

0.48-1.45

55

196.29

External decomposition kiln

Φ2.7×42

2.7

42

3.5

320

0.10-1.52

55

198.5

----

Φ2.8×44

2.8

44

3.5

450

0.437-2.18

55

201.58

External decomposition kiln

Φ3.0×45

3.0

45

3.5

500

0.5-2.47

75

201.94

----

Φ3.0×48

3

48

3.5

700

0.6-3.48

100

237

External decomposition kiln

Φ3.0×60

3.0

60

4

800

0.3-2

100

310

----

Φ3.2×50

3.5

50

4

1000

0.6-3

125

278

External decomposition kiln

Φ3.3×52

3.3

52

3.5

1300

0.266-2.66

125

283

Preheating calciner

Φ3.5×54

3.5

54

3.5

1500

0.55-3.4

220

363

Preheating calciner

Φ3.6×70

3.6

70

3.5

1800

0.25-1.25

125

419

Waste heat generator kiln

Φ4.0×56

4.0

56

4

2300

0.41-4.07

315

456

Preheating calciner

Φ4.0×60

4

60

3.5

2500

0.396-3.96

315

510

Preheating calciner

Φ4.2×60

4.2

60

4

2750

0.41-4.07

375

633

Preheating calciner

Φ4.3×60

4.3

60

3.5

3200

0.396-3.96

375

583

Preheating calciner

Φ4.5×66

4.5

66

3.5

4000

0.41-4.1

560

710.4

Preheating calciner

Φ4.7×74

4.7

74

4

4500

0.35-4

630

849

Preheating calciner

Φ4.8×74

4.8

74

4

5000

0.396-3.96

630

899

Preheating calciner

Φ5.0×74

5

74

4

6000

0.35-4

710

944

Preheating calciner

Φ5.6×87

5.6

87

4

8000

Max4.23

800

1265

Preheating calciner

Φ6.0×95

6

95

4

10000

Max5

950×2

1659

Preheating calciner



Looking for ideal Dolomite Kiln Cylinder Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Dryer for Calcining Dolomite are quality guaranteed. We are China Origin Factory of Dolomite Rotary Kiln Process. If you have any question, please feel free to contact us.

Product Categories : Rotary Kiln

Product Images

  • Dolomite Rotary Kiln Price
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Catherine Ms. Catherine
What can I do for you?
Chat Now Contact Supplier