| Payment Type: | L/C,T/T |
|---|---|
| Min. Order: | 1 Set/Sets |
| Delivery Time: | 15 Days |
Model No.: 1.4×33-4.8×74
Application: Construction, Chemical Industry
Certification: CE, ISO
Customized: Customized
Automatic Grade: Automatic
Packaging: According to the international standards or as customer's request
Productivity: 0.9-120 tph
Brand: Hongke
Transportation: Ocean,Land
Place of Origin: Henan, China
Supply Ability: 30 sets per month
Certificate: ISO9001
Port: Shanghai,Qingdao,Dalian
Calcining kaolin in Rotary Kiln is a widely used method for producing special kaolin products and Calcined Kaolin Clay.
It has four calcination temperature ranges of 700 ℃, 925 ℃, 1000 ℃ and 1400 ℃.
The calcined kaolin can be used as filler for cable plastic and rubber sealing ring, and kaolin calcined at 1000 ℃ can be used as paper filler instead of Tio2,.
Kaolin calcined at 1 500 ℃ can be used as filler for refractory products and lining of optical glass crucible.
2.Pictures of Calcined kaolin process
3. Working principle of Calcined kaolin process
Kaolin rotary kiln operates slowly under heavy load and alternating speed at high temperature.
The maintenance of accessories and the level of thermal control are related to the safety and efficiency of rotary kiln operation.
The maintenance of the transmission device is focused on the lubrication, running state, dynamic detection and meshing accuracy of the gear, and the installation accuracy of the supporting device determines whether the rotary kiln can operate safely and reliably.
In operation, attention should be paid to the distribution of bearing capacity, the arrangement of the supporting wheel, the upward and downward pressure and time of the hydraulic gear, the bearing force of the wheel, the gap between the wheel and the pad. The sealing device directly affects the thermal system and operation cost of rotary kiln. Strengthened return Daily maintenance of rotary kiln data analysis, conducive to the management of equipment.
4.Technical parameters of Calcined kaolin process
| | dimension | Capacity(t/h) | main moter power (kw) | block form | prop up an amount | weight (t) | |
| speed (r/min) | (%) Gradient | ||||||
| 1.4×33 | 0.39-3.96 | 3 | 0.9-1.3 | 15 | machinery | 3 | 47 |
| 1.6×36 | 0.26-2.63 | 4 | 1.2-1.9 | 30 | machinery | 3 | 53 |
| 1.8×32 | 0.16-1.62 | 4 | 1.9-2.4 | 30 | machinery | 3 | 78 |
| 1.8×45 | 0.21-2.11 | 4 | 2.8-3.4 | 30 | machinery | 3 | 80 |
| 2.0×45 | 0.32-2.32 | 3.5 | 3.0-4.2 | 30 | machinery | 3 | 100 |
| 2.2×50 | 0.98-2.93 | 3.5 | 3.5-4.8 | 30 | machinery | 3 | 130.8 |
| 2.5×40 | 0.44-2.44 | 3.5 | 6.0-7.2 | 55 | machinery | 3 | 151 |
| 2.5×50 | 0.48-1.44 | 3.5 | 7.0-8.0 | 55 | machinery | 3 | 167.5 |
| (9-11) | |||||||
| 2.5×54 | 0.48-1.44 | 3.5 | 8.0-8.6 | 55 | machinery | 3 | 172.5 |
| (10-12) | |||||||
| 2.8×44 | 0.8-2.39 | 3.5 | 11-12.5 | 55 | machinery | 3 | 198.5 |
| (20-22) | |||||||
| 3.0×48 | 0.5-1.35 | 3.5 | 21-25 | 55 | machinery | 3 | 237 |
| (35-42) | |||||||
| 3.2×50 | 0.48-2.44 | 3.5 | 25-35 | 55 | machinery | 3 | 278 |
| (45-50) | |||||||
| 3.5×70 | 0.5-1.54 | 3.5 | 35-45 | 125 | machinery | 3 | 411 |
| (55-70) | |||||||
| 4.8×74 | 0.35-4 | 4 | 85-95 | 630 | machinery | 3 | 841 |
| (100-120) | |||||||
5. Characteristics of Calcined kaolin process
The equipment investment is small, the rate of return is high;
the failure rate is low, if carries on the normal daily maintenance, can extend the equipment service life greatly;
the output is high, the energy consumption is low, the energy conservation environmental protection;
the product quality is good, the fire resistance is high, is favored by the customer.
Product Categories : Rotary Kiln
