Your Location: Home - Cases - Calcination EQPT Cases

Φ2.5×50m 200 TPD Regenerated Activated Carbon Rotary Kiln Line in Vietnam

Source:Calcination EQPT Cases Time:2026-11-21

Henan Hongke Heavy Machinery Co., Ltd. is a Chinese manufacturer of industrial rotary kilns, rotary dryers, ball mills, crushers and complete production lines. This article introduces the Φ2.5×50m 200 TPD regenerated activated carbon rotary kiln production line project in Vietnam. It covers the project configuration, equipment advantages, installation and commissioning service, and customer feedback.

1. Project Background and Customer Needs

The project is located in Vietnam. The customer uses spent activated carbon as raw material and planned to build a 200 TPD regenerated activated carbon rotary kiln production line. The core equipment is a Φ2.5×50m regenerated activated carbon rotary kiln, used for high-temperature regeneration of spent activated carbon to restore its adsorption performance. The customer mainly focused on:

  • Stable control of regeneration temperature and material retention time;

  • Recovery degree of iodine value and adsorption performance after regeneration;

  • Stability of the kiln shell under continuous operation and service life of the refractory;

  • Fuel consumption and thermal efficiency;

  • Sealing at the kiln inlet and outlet and exhaust gas treatment;

  • On-site installation guidance, commissioning training and spare parts supply for an overseas project.

Henan Hongke provided a Φ2.5×50m regenerated activated carbon rotary kiln and supporting equipment configuration based on the customer’s spent activated carbon properties, target regeneration indicators and site conditions. The company also supported equipment manufacturing, shipping, installation guidance and commissioning training. The specific spent activated carbon source, process temperature and capacity are subject to the contract technical agreement.

2. Company Introduction

Henan Hongke Heavy Machinery Co., Ltd. designs and manufactures industrial rotary kilns, rotary dryers, ball mills, crushers and complete production lines. Its products are used in activated carbon regeneration, environmental protection, chemical, metallurgy, mining and building materials industries. The company provides single machines, complete production lines, spare parts, on-site installation guidance and commissioning training.

3. Φ2.5×50m Regenerated Activated Carbon Rotary Kiln Production Line Configuration

The core equipment of this project is a Φ2.5×50m regenerated activated carbon rotary kiln. The line includes feeding, combustion, dust control, cooling, discharge and PLC control systems. Items marked “according to project configuration / to be verified before publishing” should be replaced with values from the contract technical agreement and final drawings before publishing.

Item

Case Configuration / Notes

Equipment name

Regenerated activated carbon rotary kiln production line

Model / size

Φ2.5×50m

Application material

Spent activated carbon

Kiln shell diameter

2.5 m

Kiln shell length

50 m

Processing capacity

200 t/d (according to contract, to be verified before publishing)

Feed particle size

According to material test and contract (to be verified before publishing)

Feed moisture

According to material test and contract (to be verified before publishing)

Iodine value requirement

According to customer raw material and target regeneration indicators (to be verified before publishing)

Regeneration temperature

According to activated carbon regeneration process requirements (to be verified before publishing)

Main motor power

According to final selection (to be verified before publishing)

Total weight

According to final drawings (to be verified before publishing)

Inclination

According to process design (to be verified before publishing)

Rotation speed

Variable frequency speed control, according to process configuration (to be verified before publishing)

Number of support stations

According to design drawings (to be verified before publishing)

Transmission

Girth gear drive, according to project design

Sealing

Multi-point sealing at kiln inlet and outlet, according to project configuration

Fuel type

Coal, natural gas or mixed fuel, according to project configuration

Exhaust gas treatment

According to project environmental requirements (to be verified before publishing)

Control mode

PLC automatic control, according to project configuration

Service scope

Installation guidance, commissioning training and spare parts supply

Φ2.5×50m regenerated activated carbon rotary kiln production line site in Vietnam - Hongke Heavy

4. Equipment Advantages of Henan Hongke

For this regenerated activated carbon rotary kiln project, the main advantages of Henan Hongke’s equipment and solution are as follows.

4.1 Selection based on the activated carbon regeneration process

The iodine value, moisture, impurity content and particle size of spent activated carbon affect regeneration temperature and retention time. Henan Hongke selects the kiln size, refractory and combustion system based on the customer’s material test results and target regeneration indicators, so the equipment parameters match the process.

4.2 Controllable regeneration temperature and stable adsorption performance recovery

The line is equipped with a combustion system and temperature monitoring to control the regeneration temperature according to process requirements. Variable frequency speed control adjusts the kiln rotation speed and controls material retention time, helping stabilize the iodine value and adsorption performance of regenerated activated carbon.

4.3 Kiln shell and refractory designed for the working conditions

The kiln shell is designed for continuous operation. The refractory configuration considers both heat insulation and service life. This helps reduce heat loss from the kiln shell and improve thermal efficiency.

4.4 Stable transmission and easy process adjustment

The kiln uses a girth gear drive and variable frequency speed control. This makes it easy to adjust the kiln rotation speed according to material and throughput requirements while keeping operation stable.

4.5 Sealing and exhaust gas treatment

The kiln inlet and outlet use multi-point sealing structures. The sealing form is configured according to the project to reduce air leakage. Exhaust gas treatment is configured according to project environmental requirements to reduce dust and waste gas emissions.

4.6 Overseas project delivery and complete line service

Henan Hongke can provide equipment for feeding, rotary kiln, cooling, exhaust gas treatment and discharge as a complete line. The company also provides export packing, shipping coordination, on-site installation guidance, commissioning training, spare parts and after-sales support to help overseas projects start production smoothly.

5. Project Execution and Customer Feedback

During project execution, Henan Hongke followed the agreed schedule for equipment manufacturing, factory inspection, export packing and shipping, and sent technical staff to provide on-site installation guidance and commissioning training. During commissioning, the company trained the customer’s operators and supported linked equipment commissioning and trial production.

In the project follow-up, the customer’s overall feedback on the cooperation was positive. The customer recognized the equipment manufacturing quality, delivery support, on-site installation guidance and commissioning training response, and considered that the production line met the project expectations. Specific customer comments, acceptance data and operating figures should be based on project visit records and acceptance documents before publishing.

6. FAQ: What to Check When Choosing a Regenerated Activated Carbon Rotary Kiln?

Q1: What capacity can a Φ2.5×50m regenerated activated carbon rotary kiln handle?

Capacity depends on spent activated carbon type, iodine value, moisture content, target regeneration indicators, fuel type and operating schedule. It cannot be decided by kiln size alone. Customers should provide a material test report and target throughput so Henan Hongke can make a preliminary selection.

Q2: Why is regeneration temperature control important for a regenerated activated carbon rotary kiln?

Activated carbon regeneration needs to desorb or decompose adsorbed organics at a suitable temperature. Too low a temperature leaves regeneration incomplete, while too high a temperature may burn off activated carbon and reduce yield. The regeneration temperature should be decided by material properties and process tests, and controlled through the combustion system and temperature monitoring.

Q3: Can installation, commissioning and spare parts be provided for overseas projects?

Yes. Henan Hongke can provide export packing, shipping coordination, on-site installation guidance, commissioning training, spare parts and after-sales support according to project needs. For more information, see spare parts and after-sales service.

7. Planning a Regenerated Activated Carbon Rotary Kiln Project? Contact Henan Hongke

If you are planning a regenerated activated carbon rotary kiln production line, or if you need a Φ2.5×50m or custom-sized rotary kiln, please send the following information to Henan Hongke:

  • Spent activated carbon type, iodine value, moisture content and material test report;

  • Target throughput and operating schedule;

  • Target regeneration temperature and regeneration indicator requirements;

  • Fuel type (coal, natural gas or mixed fuel);

  • Project location, power supply conditions and local environmental requirements;

  • Exhaust gas treatment and automation control requirements.

Henan Hongke will provide a preliminary selection suggestion and quotation based on the project conditions. Please use contact Hongke to send your requirements, or visit our products page to learn more about rotary kiln products.

SUPPORT

Technical Consultation

Our technical team is available 24/7. Share your requirements and we will reply within 30 minutes.

sales@rotarykilnchina.com

Leave A Message

Our technical support team works around the clock. Feel free to leave your message anytime!

Consult
Wechat