PRODUCTS

Kaolin Rotary Kiln

Kaolin Rotary Kiln
Capacity:
10,000 to 200,000 tons/year (depends on raw material composition)
Models:
Ø1.6×32m to Ø4×80m
Fuel:
Natural gas, blast furnace gas, coal, etc
Application:
Suitable for paint and coatings, papermaking, rubber and plastic products, cables, ceramics, and other industries

PRODUCTS

Product Introduction

The kaolin rotary kiln is made up of the kiln head, kiln tail, kiln body, and support frame. When working, it is equipped with a preheater, cooler, dust collector, and conveyor belt.
When the kaolin rotary kiln starts working, the raw kaolin material goes through the preheater and enters the cylinder from the kiln tail. Because the cylinder is installed at a slight angle and rotates slowly, the raw material rolls around the inside and moves from the higher end to the lower end. After the raw material is decomposed and burned inside the kiln, the finished clinker is discharged from the kiln head (the lower end) and goes into the cooler.

Kaolin Rotary Kiln


PRODUCTS

Product Features

Easy to use: The outside structure is simple, and the inside structure is reasonable. It is easy to install, operate, and maintain.
Energy saving: The cylinder runs very smoothly. Heat loss is low, power consumption is low, and the failure rate is low. This not only recycles heat effectively but also lowers production costs.
Good sealing: The sealing inside the kiln is well-designed. It stops outside dust and cold air from getting in and reduces dust from leaking out. This lowers dust pollution and makes the working environment better.
Automatic cooling: The equipment has an automatic cooling device. After calcination, the kaolin automatically goes into the cooling device. This increases the recovery rate of the kaolin material and increases product output.

PRODUCTS

Technical Parameters

Spec (m)

Rotation Speed (r/min)

Slope (%)

Capacity (t/h)

Reducer Model

Ø1.6×32m

0.58-2.85

4

2

ZQ75-50

Ø1.6/1.9×36m

0.53-1.59

4

2.5-3

ZQ110-7

Ø1.9×39m

0.53-1.59

4

3-3.4

ZQ125-7

Ø2.2×45m

0.214-1.64

3.5

4-5

Main: ZS125-5 / Aux: ZQ40-40

Ø2.5×50m

0.62-1.5

3.5

5-6

Main: ZS165-5 / Aux: ZS50-1

Ø2.5×55m

0.62-1.5

3.5

5-6

Main: ZS165-5 / Aux: ZS50-1

Ø2.8×55m

0.62-1.5

3.5

6-7

Main: ZS165-5 / Aux: ZS50-1

Ø3.0×60m

0.5-1.5

3.5

7-9

Main: ZS165-3 / Aux: ZS50-1

Ø3.2×64m

0.4-1.5

3.5

8-10

Main: ZS130-16 / Aux: Zl50-1

Ø3.5×70m

0.4-1.5

3.5

12-14

Main: ZSY500-40 / Aux: Zl50-14

Ø4.0×80m

0.4-1.5

3.5

16-20

Main: ZLY630-35.5 / Aux: ZSY280-35.5

Note: Our products are constantly updated and improved. Hongke Heavy Machinery reserves the right to change parameters and designs without prior notice to users. This configuration table is for reference only and may change based on the customer's geographical environment and requirements. Please contact us for detailed information.

SUPPORT

Technical Consultation

Our technical team is available 24/7. Share your requirements and we will reply within 30 minutes.

sales@rotarykilnchina.com

Leave A Message

Our technical support team works around the clock. Feel free to leave your message anytime!

Consult
Wechat